1. In-Line tray changer
(Solutions/Special design)

The Rendisk In-Line traychanger is placed behind traywasher. Trays are automatically fed into 2 traydispenser. If 1 dispenser is filled completely, the traychanger switches automatically to the other ...

2. Cutlery magnets
(Solutions/Special design)

Rendisk has designed two types of cutlery magnets; the belt type and rotor type. Cutlery magnets are designed to automatically extract cutlery from the trays. The magnet drops the cutlery in a cutlery ...

3. Ergo-cord Economic
(Solutions/Conveyor systems)

... are any items left on the tray after sorting. If needed, the height detector automatically stops the conveyor. If the blocking of the height detector is taken away the tray conveyor is started again.  ...

4. Ergo-cord Advanced
(Solutions/Conveyor systems)

... the tray after sorting. If needed, the height detector automatically stops the conveyor. A signal is send to the PLC control box. If the blocking of the height detector is taken away the tray conveyor ...

5. Clean-flex Economic
(Solutions/Conveyor systems)

... its grib on the baskets.   The perforated sieve collects larger pieces of waste, like teabags etcetera. Jam safety device           This safety device automatically switches of the system when a ...

6. Clean-flex Advanced
(Solutions/Conveyor systems)

... teabags etcetera. Jam safety device           This safety device automatically switches of the system when a jam occurs.        ...

7. In-front system
(Solutions/Sorting units)

... can easily be sorted into baskets which are placed on the Rendisk sorting unit Cleansort. When a basket is filled it can be pushed to the basketconveyor, type Cleanflex. The basketconveyor automatically ...

8. High-Low System
(Solutions/Sorting units)

...           Trays can be buffered during off-peak hours. The system automatically eliminates the space between trays and increases the efficiency in the dishwashroom. The High-Low sorting unit is ...